| Model: LW-STL-3528S120-DC-I2 |
|
|
|
|
|
|
|
|
|
|
|
| Parameter： |
|
|
|
|
| ● SMD: |
3528SMD |
|
|
|
| ● Chip brand: |
Sumang/Epistar/QiMei |
|
|
|
| ● Voltage: |
DC12/24V |
|
|
|
| ● LED Qty: |
120pcs/M |
|
|
|
| ● Color: |
R/G/B/W |
|
|
|
| ● IP Grade: |
IP20/IP65/IP67/IP68 |
|
|
|
| ● Power: |
9.6W |
|
|
|
|
|
|
|
|
|
|
| Speciality： |
|
| ● Using the high quality and super bright LED 3528 leds, power consumption is small, work with low heating, no stroboscopic light, direct current. Free from visual fatigue caused by traditional light source. Resistant to impact, strong shock resistance ability.Work with 24V and direct current. Safe and reliable. |
|
|
| ● Color is pure. beautiful and rich colorful. There are 7 colour including red yellow, blue, green white etc. Also various colors may be available according to the demands of customers. |
|
|
| ● Every six LEDs can form a loop, it can cut along tangent, not only it can't destroy other parts, but also can be extend unlimited, we can do variety of lengths led strip according to customer requirement. Back with two-side glue, used to paste attached in fixation. |
|
|
| ● The light products, thin, suitable for small space inside the installation. |
|
| ● Drop Glue 、PE Tube 、PVC Sealed. |
| ● With very flexible FPC, bent randomly and fixed on any rugged surface. Wide application. |
|
|
|
|
| Product Picture: |
|
 |
|
|
|
|
| Packaging: |
|
 |
|
|
| Application: |
|
| ● Widely used in sketching a landmark buildings, Bridges, building castles in park plaza outline of bright project, the more become the ornament, bar, cafe, KTV hotel, bath center, discos, nightclubs of high-grade places of entertainment beautiful beautiful scenery line. Given its high brightness, it has good flexibility, plasticity, variety, flowery colour personal DIY home decoration, window, fashion show, the path to the instructions are as first choice |
|
|
| ● Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed. |
|
|
|
|
|
|
|
|
| Installation: |
|
| ● Firstly it connected to power adapter and then connect to the power supply，Light lamp to article。(Note: the power of the power adapter must be greater than the strip maximum power). |
|
|
| ● Secondly, led strip connected to switch power supply "+" and "—" , And then switch power supply connected to the ac power to light the lamp (Note: the power of switch power supply must be greater than the strip maximum power, switch power supply output voltage accordance with the strip voltage) |
|
|
|
PIR LED Floodlight
